1 00:00:00,500 --> 00:00:01,660 Lock picking. 2 00:00:01,660 --> 00:00:03,510 In this demonstration, I want to show you 3 00:00:03,510 --> 00:00:05,960 how easy it is to bypass the security 4 00:00:05,960 --> 00:00:08,470 that a standard padlock tries to afford you. 5 00:00:08,470 --> 00:00:11,270 You can do this by using an inexpensive lock-picking set 6 00:00:11,270 --> 00:00:14,970 that you can find on Ebay or Amazon for about $25. 7 00:00:14,970 --> 00:00:16,620 This same basic technique works 8 00:00:16,620 --> 00:00:18,210 for a standard door lock, as well, 9 00:00:18,210 --> 00:00:20,840 like the one you'd find on your office or your home, 10 00:00:20,840 --> 00:00:21,673 and the reason is 11 00:00:21,673 --> 00:00:24,360 they both rely on a pin and tumbler system. 12 00:00:24,360 --> 00:00:26,550 Now, hopefully, this shows you how important it is 13 00:00:26,550 --> 00:00:29,050 to pick a high-quality pick-resistant lock 14 00:00:29,050 --> 00:00:31,080 to protect your networks, servers, 15 00:00:31,080 --> 00:00:33,100 and your organizational facilities. 16 00:00:33,100 --> 00:00:34,430 So, to do this demonstration, 17 00:00:34,430 --> 00:00:35,580 we're going to use four things. 18 00:00:35,580 --> 00:00:37,170 I have a standard padlock, 19 00:00:37,170 --> 00:00:39,060 I have the keys for that padlock, 20 00:00:39,060 --> 00:00:41,150 I have a lock pick, and in this case, 21 00:00:41,150 --> 00:00:42,740 it is a single-lock pick 22 00:00:42,740 --> 00:00:44,160 that will have one single tooth 23 00:00:44,160 --> 00:00:45,930 that will try to move the pins up and down, 24 00:00:45,930 --> 00:00:47,420 and I have a tension wrench. 25 00:00:47,420 --> 00:00:48,420 So, at first, I'll show you 26 00:00:48,420 --> 00:00:49,980 that the standard padlock, 27 00:00:49,980 --> 00:00:51,320 and you could see this is see-through 28 00:00:51,320 --> 00:00:53,250 so you could actually see inside of it. 29 00:00:53,250 --> 00:00:55,930 We're going to put the key in, just like we normally would, 30 00:00:55,930 --> 00:00:58,760 we will open it, and you can see it's just a standard lock, 31 00:00:58,760 --> 00:01:00,030 it opens to the right, 32 00:01:00,030 --> 00:01:02,480 and if we take the key out, we can lock it again. 33 00:01:04,410 --> 00:01:05,470 Now, what we're going to do is 34 00:01:05,470 --> 00:01:07,560 we're going to take the tension wrench, 35 00:01:07,560 --> 00:01:10,360 and we're going to place it into the keyhole at the bottom. 36 00:01:14,501 --> 00:01:15,810 Now, when we go to open the lock, 37 00:01:15,810 --> 00:01:17,570 we want to be able to turn it to the right. 38 00:01:17,570 --> 00:01:19,950 So, I'm going to constantly apply just a little bit of pressure 39 00:01:19,950 --> 00:01:22,530 with my pinky to hold that in place. 40 00:01:22,530 --> 00:01:23,870 And I'm going to use the lock pick 41 00:01:23,870 --> 00:01:26,620 and I'm going to pick each of those six pins 42 00:01:26,620 --> 00:01:28,730 to find the right place for them. 43 00:01:28,730 --> 00:01:31,850 And once we get them right, the lock will open. 44 00:01:31,850 --> 00:01:34,580 And you can see just how quickly and easily it is 45 00:01:34,580 --> 00:01:37,997 to be able to pick a lock in this manner.